Daily maintenance methods of household oxygen generator
Daily maintenance methods of household oxygen generator
With the enhancement of modern people's awareness of health care and the special needs of some patients, many families have purchased domestic oxygen generators. In long-term use, in addition to standardized operation, the equipment should be regularly maintained and maintained to ensure the normal operation of the oxygen concentrator and properly extend the service life of the oxygen concentrator.
To make the oxygen concentrator work better, it needs a good use environment and regular maintenance. The following contents must be carefully read!
1. The domestic oxygen concentrator should be placed in a dry and ventilated place, and must not be placed in a damp place.
2. Do not let oil or grease come into contact with the oxygen generator to avoid fire after contacting with oxygen.
3. During oxygen production, the indoor air should be kept clean, and smoking indoors is strictly prohibited.
4. Do not place objects on the domestic oxygen generator, such as cups, mobile phones, books, etc., which will affect the heat dissipation of the oxygen generator.
5. Some oxygen generators use the bottom for heat dissipation. Please place them directly on the floor or tile instead of foam or carpet to avoid affecting heat dissipation. The best distance is more than 15cm from the wall.
Correct curing method
1. Machine case cleaning:
The outside of the casing should be wiped once a month: when cleaning the body of the domestic oxygen concentrator, the power should be turned off, and then wiped with a clean and soft wet towel.
2. Clean the filter screen:
The filter screen of the concentrator is attached to the air inlet of the fuselage. When cleaning, open the cover plate and remove the filter screen. Soak the filter screen with clean water or diluted non-corrosive household detergent. Then wash it with clean water and dry it before it can be installed on the machine for further use, or directly replace the standby filter screen. Wash 1-2 times a month.
3. Replacing filter cotton of oxygen concentrator:
The filter cotton is the air filtration device of the oxygen generator, which plays a very important role in ensuring the health of oxygen consumption and prolonging the service life of the compressor and molecular sieve. The filter cotton is placed in the oxygen generator. The filter cotton should be checked regularly. If it is found that it has absorbed a large amount of dust or has been blocked by dust, it should be replaced in time (it cannot be washed). The method to check or replace the filter cotton is: first open the cover plate, remove the used filter cotton, replace the new filter cotton and put it back into the machine, and then cover the cover plate.
4. Clean the humidification bottle:
During oxygen absorption, distilled water or cold boiled water can be put into the humidifying bottle to ensure that the liquid in the humidifying bottle is changed every day. The humidification bottle shall be cleaned at least once a week, first with detergent and then with clean water to ensure the hygiene of oxygen.
5. Clean the oxygen pipe:
The oxygen pipe should be cleaned every three days. The nasal aspirator on the oxygen tube should be cleaned after each use. It can be soaked in 5% potassium permanganate solution for 5 minutes and then washed with clean water, or wiped with medical alcohol. It is recommended to replace the oxygen pipe every 2 months. (Note: The oxygen tube should be kept dry without water drops.)
As expert on oxygen concentrator, AE-5 Oxygen Concentrator uses PSA gas separation technology and France imported CECA molecular sieve. It is very popular with the white collar, the pregnant, the students, the elder and the patients. You may find our oxygen concentrators in hospital, clinics, nursing home, beauty salon and other places.
Model: AE-5-NW
Flow Rate: 0~5L/M
Oxygen Concentration: 93± 3%
Sound Level: ≤ 36dBA
Net weight: 21.5kg
Dimensions: 372*340*612mm
If you are interested in AERTI medical 5L oxygen concentrator, pls contact us at any time.